Types and Uses of Injection Mold Interlocks

In a plastic injection mold, we divide the mold into a core and a cavity, which are often opened and closed. In order to...
2 plate mold

2 plate mold

2 plate mold refers to the mold that splits into a fixed half and a movable half when the mold opens. ...

3 plate mold

1. How the 3 plate mold moves: (1). After the mold is fully filled, heat preservation, pressure...
two plate mold series

What Are the Types of Mold base?

Types of Standard Plastic Injection Mold Base   1. Standard Edge Gate Mold Base (2 plates mold)
polish marks

Wave line(marks) on mold polishing process

1.Inappropriate Operation Firstly , during the polishing process, the operator may have applied inappropriate...
mold base

The Selection Principle and Calculation Method of Mold Bases

As the framework of a complete set of molds, the mold base is the main part of a mold. It is assembled...
mold venting for runners

Mold Venting System & Design Principles

Sources of air in the Mold Air trapped in the cavity and the gating system; the moisture contained in...
Mold spring

Mold spring design

Mold Spring Specs The rectangular-sectioned mold spring (mold spring for short) is mainly applied to stamping...
Draft angle for mold texturing

The mold texturing

The Purpose of Mold Texturing Improve the surface finishing of a plastic part Allow the product...
sprue-gating-hot-runner system

Hot runners for plastic injection mold

Why we need hot runner? The cold runner of a mold refers to the section between the mold...

POPULAR ARTICLES