2 plate mold
2 plate mold refers to the mold that splits into a fixed half and a movable half when the mold opens. A deviation of the […]
How to calculate the injection mold price?
The Basic Composition of Injection Mold Cost The mold is an important process equipment for the manufacturing of various industrial products, so it has become
How to calculate the injection mold price? Read More »
Three plate mold
1. How the three plate mold moves: (1). After the mold is fully filled, heat preservation, pressure holding and cooling will be performed. Under the
What Are the Types of Mold base?
Types of Standard Plastic Injection Mold Base 1. Standard Edge Gate Mold Base (2 plates mold) 2. Standard Point Gate Mold Base (3 plates mold)
What Are the Types of Mold base? Read More »
Wave line(marks) on mold polishing process
1．Inappropriate Operation Firstly , during the polishing process, the operator may have applied inappropriate polishing method / technique or ununiform force, or the polisher rotates
Wave line(marks) on mold polishing process Read More »
O-ring and connector for cooling
The size for O-ring and their slot: Diameter 6mm & 8mm water line Diameter 10mm & 12mm water line Diameter 16mm & 20mm water line
O-ring and connector for cooling Read More »
The Selection Principle and Calculation Method of Mold Bases
As the framework of a complete set of molds, the mold base is the main part of a mold. It is assembled from a diversity
The Selection Principle and Calculation Method of Mold Bases Read More »
Cooling systems for plastic injection mold
The cooling system is also known as the mold temperature adjusting system.Importance to adjust the mold temperature: Mold temperature plays an important role in determining
Cooling systems for plastic injection mold Read More »
Locating Ring and Sprue bushing types
Locating Ring Design Shape & Size: The locating ring is usually designed in two shapes, i.e., type A (Fig. 3-1) and type B (Fig. 3-2).
Locating Ring and Sprue bushing types Read More »
Mold Venting System & Design Principles
Sources of air in the Mold Air trapped in the cavity and the gating system; the moisture contained in the plastic material is evaporated into
Mold Venting System & Design Principles Read More »